Electric Water Heaters | Gas Water Heaters | Propane Water Heaters | Tankless Water Heaters
Please click on a category to view products.
 
Free Standard Shipping on Water Heaters shipped within the Mainland Continental United States
 
AO Smith BPD Water Heater Natural Gas
  • Designed for small office buildings and duplex apartment homes
  • DynaClean™ II system reduces lime and sediment buildup
  • PermaGlas® glass-lined tank resists corrosion
  • Built-in safety feature prevents pilot or main burner operation if blower is not running
[More]
AO Smith BT Water Heater Natural Gas
  • PermaGlas® glass lining prevents tank corrosion
  • Small diameters and shorter heights for greater installation ease
  • Handhole cleanout for easy maintenance
  • Automatic safety shutoff if pilot is extinguished
[More]
AO Smith BTF Water Heater Natural Gas
Conservationist® Standard Vent Gas Water Heaters>
    • Blue Diamond™ glass coating delivers more than twice the corrosion resistance of industry-standard glass lining
    • Features C3 Technology™ that protects against accidental ignition of flammable vapors
    • Environmentally friendly Green Choice™ gas burner reduces NOx emissions by 33% compared to standard burners
    • Piezo igniter for easy “no match” pilot ignition
[More]
AO Smith BTH Water Heater Natural Gas
  • 96% efficiency dramatically lowers operating costs
  • Patented Dynamix Cyclonic Burner™ offers precise air/fuel mixing at point of ignition
  • Exhaust and air intake positioned so heater can be installed in corners or flush against wall
  • 4 handy venting options using inexpensive 3˝ or 4˝ PVC pipe
[More]
AO Smith BTL Water Heater Lo Nox Natural Gas
  • Built-in induced draft blower — helps solve negative air pressure problems
  • The Eliminator™ self-cleaning system improves energy efficiency and extends tank life
  • Compact design (almost a foot shorter than models they replace)
  • Can be installed standalone, manifolded or connected to storage tanks
[More]
AO Smith BTR Water Heater Natural Gas
  • Effikal automatic flue damper minimizes standby heat loss to achieve 80% thermal efficiency
  • Inlet/outlet connections located top, front and rear for greater installation flexibility
  • Space-saving units are up to one foot shorter than models they replace
  • Installs standalone, manifolded or connected to storage tanks
[More]
Rheem G Water Heater Natural Gas
  • Small jacket diameters
  • Short floor-to-vent heights
  • Multiple Water Connections
  • System Sentinel™ LED diagnostic system
  • Patented multiflue design
  • Low profile automatic flue damper
  • Spark-to-pilot ignition system
  • Full port, full flow brass drain valve
  • Factory Installed AGA/ASME rated Temperature and Pressure relief valve
  • Stainless steel burners
  • 180 degree max operating temperature
  • Hand-hole cleanout
  • Stainless steel burners
  • 180ºF max operating temperature
  • LED diagnostics on all damper assemblies for easier service
  • Certified for a 150 PSI maximum working pressure (160 PSI for ASME models)
  • Manual reset high limit (ASME models)
  • Low NOx models available
[More]
Rheem GHE Water Heater Natural Gas High Efficiency
  • 316L stainless steel tank construction (requires no anode rods).
  • No chimney required - vents up to 40 feet using 3" schedule 40 PVC, CPVC or ABS pipe - direct vent using plastic pipe.
  • Thermal efficiency of 95% dramatically reduces operating costs.
  • 85 equivalent feet of vent length.
  • Low NOx emissions. Meets SCAQMD Rule 1146.2.
  • High impact plastic jacket eliminates dents.
  • 2" of non-CFC, polyurethane foam insulation.
  • Less than 1/2 degree per hour heat loss (R17).
  • Corrosion resistant, high efficiency 90/10 cupronickel heat exchanger.
  • Self-diagnostic electronic control with digital readout for water temperature, set point and differential.
  • Removable front cover allows easy access to equipment (24" service clearance recommended).
  • Temperature range from 70ºF to 160ºF (maximum temperature setting of 180ºF available on HE45-160 and HE45-199 booster models only).
  • Zero clearance to all combustible surfaces.
  • Factory installed AGA/ASME rated T&P relief valve.
[More]
Rheem GP Water Heater Natural Gas
  • NON-CONDENSING DESIGN - Helps prevent corrosion - no condensate pump or drain needed.
  • INTEGRAL AUTOMATIC BLOWER - With 110/120 volt electrical system.
  • PATENTED MULTI-FLUE TANK DESIGN - Proprietary steel formulation, patented multi-flue design, and two coats of high temperature porcelain enamel to maximize corrosion resistance result in a superior heat exchanger design.
  • SPARK-TO-PILOT IGNITION SYSTEM - Standard on all models. Provides reliable and energy saving ignition sequencing by igniting the pilot only when the thermostat calls for heat.
  • System Sentinel™ LED Diagnostic System
  • Full port, full flow brass drain valve
  • No masonry or metal vent chimney required
  • Installs with 3" or 4" schedule 40 PVC pipe
  • Vents up to 50 feet
[More]